Double Expansion Anchors for Concrete Zinc Alloy 3/8-16 * 3/4" O.D.
Choisiez votre paquet
Description
Product Number | ANCD-03007 |
Material | Zinc Alloy |
Thread Size | 3/8"-16 |
Drill Bit Size | 3/4" |
Drill Bit Size Decimal Equivalent | 0.75" |
Min. Installation Depth | 1 3/4" |
Diameter | 3/4" |
Strength, lbs. | |
Pull-Out | 500 |
Shear | 750 |
Tested In | 4,000 psi Concrete |
Thread | |
Direction | Right Hand |
Type | UNC |
Spacing | Coarse |
Fit | Class 2B |
For Use In | Block, Brick, Concrete |
Removable | Permanent |
Anchor Type | Female Threaded |
System of Measurement | Inch |
RoHS | RoHS 3 (2015/863/EU) compliant |
Also known as double expansion anchors, these expand from both sides for full contact and a secure hold. To install, tap into a drilled hole with a hammer and position your fixture. Then, insert a screw or threaded rod and tighten. For maximum expansion, the anchor should protrude slightly above the surface before threading the screw. Pull-out strength and shear strength values are 25% of the ultimate values.
You will be satisfied with your purchase. Over 90% of our product are in stock and the Double Expansion Anchors for Concrete Zinc Alloy 3/8-16 * 3/4" O.D. are in stock.
If you have any inquiry or question, please feel free to contact us :
Info@RJM-Fasteners.ca
Double Expansion Anchors for Concrete Zinc Alloy 3/8-16 * 3/4" O.D.
Inventory Last Updated: May 14, 2024
If you have any inquiry or question, please feel free to contact us :
Info@RJM-Fasteners.ca
Double Expansion Anchors for Concrete Zinc Alloy 3/8-16 * 3/4" O.D.
Inventory Last Updated: May 14, 2024
Nous vous recommandons également
Female Threaded Anchor for Concrete Zinc 3/8-16 [Drop In]
Prix régulier
139 $ CAD
1.39 $ CAD
Choisiez votre paquet
Single Expansion Anchor for Concrete Zinc Alloy 5/16-18 * 1-1/2"
Prix régulier
183 $ CAD
1.83 $ CAD
Choisiez votre paquet
Wedge Anchor for Concrete Zinc 1/2-13 * 10" [Philips Drive]
Prix régulier
853 $ CAD
8.53 $ CAD
Choisiez votre paquet